Right & Complete, First Time, Every Time
Belfast MET – Castlereagh Campus
Belfast &
Job:
Belfast MET – Castlereagh Campus
Industry:
Education
Client:
Irwin M&E
Application:
3no. Elco Triogen XL Boilers
Project manager:
Brian Fitzsimmons
Project Brief
Founded in 2007. Belfast Met is the largest further and Higher Education College in Northern Ireland and one of the largest in the UK. They are located across four main sites: Titanic Quarter, Millfield, Castlereagh, and e3 Springvale.
John J Doyle Ltd was contracted by Irwin M&E to design and supply labour materials. This was for the installation of a flue system to suit 3 x Elco Triogen XL boilers.
Materials Used
Dinak DWJ Twill Wall 250ø & 400ø
Result
Dinak DWJ stainless steel 250mm flue rises off the back of each boiler and connects into a 400mm header system. The header travels horizontally at a high level within the plant room with a 3degree fall before exiting too outside. Once outside the flue turns to rise vertically, clipped to the exterior of the existing concrete chimney stack, for approximately 20m to termination. The system is completed with an open terminal with mesh complying with all regulations.
Flue calculations and design done inhouse.
All chimney and flue products were supplied and installed CE marked and compliant with European and Regional Standards.